Maximum Shock and Vibration Protection
The Classic Rack case is a smooth finished roto case with a 19" wide EIA standard rack and a variety of rack depths including 17", 18", 20", 23", 25", 28", 33".
Extra rugged, rotomolded Peli™ Classic Rack cases have demonstrated their strength thousands of times over by saving ultra-fragile equipment from damage during transport. It has the option for a Lock 'N Load, removable rack. It is the strongest, most secure rack in the industry. Our precision - tuned, elastomeric, shock mount systems provide maximum shock and vibration protection for ultra-fragile equipment.
Classic Rack cases are a requirement when you are transporting valuable, highly fragile equipment that needs to get there intact. Nothing protects better than a Peli™ Classic Rack Case.
Specifications
Sizes
- 3U, 4U, 5U, 6U, 7U, 9U, 10U, 11U, 14U, 21U, and 26U
G-Rating
- 15 - 30
Payload
- 8-shock mounts: Up to 170 lbs. (77 kg)
- 16-shock mounts: 160 - 200 and 200 - 340 lbs (72.6 kg - 154 kg)
Sway Space
- 2" for maximum ability to decelerate shock forces and provide airflow
Base Features
- Color: Grey (133)
- Zinc Cobalt Black Non-Locking Catch-and-Strike Hardware (HCB)
- Black Stainless Steel Handles
- Choose either a Heavy Duty Extruded Aluminum Rack Frame or a Square Hole Frame available for cases up to 14U
Options/Accessories
Shock/Vibration System
Cylindrical Shock Mounts isolate equipment from vibration as well as impact forces. Shock mounts vary in size depending on protection requirements - from delicate equipment to rugged electronics.
Square Hole Frame Option
Cylindrical Shock Mounts installed on a heavy-duty square hole frame. Shock mounts attach to the metal reinforcement rails that run the full length of each corner of the case body. Cage nuts kits provided based on the Metric or SAE frame option that is chosen.
Customization
Classic Rack cases are fully configurable and made to order. They can also be customized by our Technical Sales solution team. Call if you need a 1U extension to any of these standard U sizes.
U Size
Rack Depth
Weight
Hardware
Catch & Strike Latches
Cobalt Black Plate Zinc
Supermac rack cases come standard with black zinc non-locking hardware
Black Oxide Plated Stainless Steel
Upgrade to black oxide coated stainless steel for corrosion resistant hardware.
Hardware
Black Oxide Plated Stainless Steel
Upgrade to black oxide coated stainless steel for corrosion resistant hardware.
Lifting and Stacking Options
Lift/Tie Down Rings
Black plated Stainless Steel (1000lb/ring rating) for Hoisting/tie down points, 2" (50 mm) diameter clearance for hooks, spring loaded, pivots 180 degrees.
Stencils
Custom Stenciling
Per MIL-I-43553, Black, White, Yellow. One color per case.
Labels
Front Labels
A set of two labels
Standard Labels
Standard case labels
Caster Storage in Lid
Caster Storage
Holds four (4) casters on one (1) machined aluminum extrusion with mounting hardware (5" lid only).
Caster storage is not available in rear lid when when pouch is chosen in rear lid.
Drawers
Drawers
19" rack-mountable with drawer slides, 14 inches (356 mm) deep, key lockable. Available in 2U, 3U, and 4U heights. U = 1.75 (44.45mm).
Shelves
Sliding Shelves
Fixed and sliding shelves available. (35 lbs. per shelf)
Keyboard Tray
Keyboard Tray
Comfortable standard size keyboard. 24" (610 mm) wide, 12 inches (305 mm) deep. Attaches to case front catches.
3.5" or 5" Casters
Locking Swivel Casters
Button release QuickClip™ swivel casters, removable or fixed, 3.5" or 5.0" wheel diameters.
Locking Removable 3.5" and 5" Bottom Casters
Locking Removable 3.5" and 5" Bottom Casters
Enhances the bottom panel strength of rack cases, while providing button release of swivel casters. Choice of 3.5" or 5.0" wheel diameters
Casters
Bolt-On Edge Casters
Two (2) bolt on edge casters on the bottom edge of the case for cart-like movement. Load limit is 75lbs/wheel 150lbs gross case weight.<
Casters
Mold-In Edge Casters
Two (2) mold-in edge casters bolted through the case on the bottom edge of the case for cart-like movement. Load limit is 75lbs/wheel, 150lbs gross case weight.
Lid Storage Pouch
Lid Storage Pouch
Zippered pouch for storing cables and accessories in front and/or rear lids. Requires a 5" lid. Pouch not available in 5" rear lid when caster storage option is chosen.
Card Holder
Card Holder
Metal holders for shipping cards. Choose from either 2-3/8" x 5-3/8" (60 x 136 mm) or 4" x 6", (102 x 152 mm). Ask which card holder size(s) fits your desired rack case.
Pressure Relief Valve and Closed Loop Gasket
Pressure Relief Valve (PRV) with Closed Loop Gasket
The manual PRV button is used to maintain correct pressure differential. Pressure range: +/- 0.5 PSID
Lockable Cable Catches
Lockable Cable Catch
One (1) set of four (4) cables per case. Allows the case to be padlocked shut. The cable is made of tamper-resistant aircraft steel. Padlock Not Included.
Interlocking Catches
Interlocking Catch
One (1) set of four (4) cables per case. Allows the case to be padlocked shut. The cable is made of tamper-resistant aircraft steel. Padlock Not Included.
Coupling Catches
Coupling Catches
Built in attachment system latching one case to another for secure stacking
Frame Supports
Adjustable Vertical Supports
These aluminum supports installed onthe side walls of the rack, top to bottom.
Adjustable Horizontal Supports
These aluminum supports installed on the side of the rack, front to back.
Fixed Bottom Support Rails
These aluminum supports installed on the bottom of the rack, front to back.
Frame Supports
Adjustable Horizontal Supports
These aluminum supports installed on the side of the rack, front to back.
Rack Frame Option
Removable Rack System
This option is only available on Classic Racks and SuperMAC™ racks.
Shock System
Shock Mount System
Cylindrical Shock Mounts isolate equipment from vibration and manage the impact to the rack mounted equipment from drop forces. Rack cases commonly use 8 shock mounts that vary in weight ratings depending on the protection requirements - from delicate equipment to rugged electronics.
Shock System
Shock Isolation Mounts
Patent pending shock mount design made of a heavy-duty rubber that is inserted into the case body at the corners to provide a flexible, shock absorbing attachment for the rack frame.
Heavy Duty Shock System
The heavy duty shock system is used on Peli Classic Rack case models with payload weights from 160 lbs (72.6kg) to 340 lbs (154.2 kg).
- Cases 7U and smaller receive 16 shock mounts.
- Cases 9U and larger receive wall stiffeners, lift/tie down rings and 16 shock mounts.
Handles
Cobalt Black Plated Handles
90° stop handle.
3-hole: 35 lb. lift/handle
4-hole: 150 lb. lift/handle
Lid Hangers
Lid Hangers
Store lids on side of case when case is open. Set of four (4) hangers for two lids.
